Step 2:
If you want to automatically record several data frames,
please select AUTO LIMITED under RECORD MORE.
Enter a time interval for recording under RECORD-TIME
INTERVAL [sec], in this example: 1, i.e. a new value is
called from the sensor every second).
Then enter the maximum number of values you wish to
record in the RECORD VALUES [MAX 50 000] field.
Please note: Recording can also be stopped earlier by
clicking STOP RECORD, the data recorded so far will not be
lost.
The TOTAL RECORD TIME field indicates how long
recording will take (in days, hours, minutes, and seconds) if
all data are recorded.
Step 3:
By pressing the button SELECT RECORD FILE a file can be
selected in which the data frame will be stored.
If you select an already existing file name, you will be asked
whether you want to overwrite the existing file or not.
Step 4:
Pressing the START RECORD button starts automatic data recording.
The recorder starts to record data, and the button START RECORD is red to indicate that recording is active.
The respective data frames are shown in the display windows.
In the two display fields RECORDED and REMAINING you can check how many data frames have been
recorded, and how many frames remain to be recorded.
Please note:
During recording the two input fields RECORD-TIME INTERVAL and RECORD VALUES [MAX 50 000]
are inactive.
Step 5:
When as many data frames as set under RECORD VALUES [MAX 50 000] have been recorded, or when the
STOP AUTO RECORD button is pressed, a pop-up window will appear which confirms that the file is stored.
If you want to record an unlimited number of data, select the AUTO UNLIMITED function under RECORD MORE.
Then select the desired recording interval and press START RECORD.
If you want to record data "manually", select the MANUAL RECORDING function under RECORD MORE.
You can start reading data from the sensor by pressing the GO button. These data are visualised in the display
window. Pressing the CAPTURE DATA FRAME button saves a data frame in the file that was selected under
SELECT RECORD FILE. The RECORDED field shows the sum of the frames already recorded.
If AUTO TRIGGERED is selected under RECORD MORE, and TRIGGER = SELF, EXT1, EXT2, EXT3, or EXT4
is selected, the sensor will automatically send a data frame after each drop of the trigger when START RECORD
is pressed. This data frame is captured and recorded by the recorder.
Pressing the STOP RECORD button terminates the automatic sending function of the sensor again.
Please note:
When you press START RECORD, the file that is selected under SELECT RECORD FILE will be deleted.
With RECORD FRAME MANUALLY, the file will be created if it does not already exist. If the file already
exists, the data are added to the existing file.
colorCONTROL C4
25
(107 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais